LEAKPEN

Mobile, handy and user-friendly leak detector

Mobile device with outstanding measurement properties for prior localisation and acoustic leak detection on pressurised pipes. Valves and fittings, hydrants, house connections, etc., are very straightforward to check during maintenance and checks, meter readings or specific searches for leaks.

 

Set contains the following articles

Art-Nr.: 20163 – LEAKPEN 2022 (FSC-BT901) without battery
Art-Nr.: 20265 – Lanyard with VONROLL HYDRO logo
Art-Nr.: 21020 – Batt. Energizer Lithium L91 Typ AA 15.V

Characteristics

Housing Stainless steel, OPX PP
Dimensions Diameter 18 mm × 191 mm ergonomic shape for operation with one hand Protection rating:
Protection rating IP67
Weight 170 g ± 6%, including battery
Operating temperature - 20 °C to + 50 °C
Storage temperature - 40 °C to + 60 °C
Humidity 0% to 100 % RH
Power supply Handheld device: 1 × 1.5 V AA lithium / alkaline / Ni-MH, replaceable
Operating time At least 10 hours, with new alkali battery 2500 mA at 21 °C – automatic switch-off after 2 minutes of inactivity without Bluetooth connection, automatic switch-off after disconnection of the Bluetooth service Connection
Visual display Red LEDs (9 pieces) for displaying the leak noise level and battery status, blue LED to indicate Bluetooth connection
Bluetooth Interference-free Bluetooth 5.0 wireless technology (class II)
HF module Sierra Wireless AirPrime BC127-EXT, 5.0 Dual Mode
Transmission power +10 dBm (maximum)
Antenna Internal ceramic chip
Acousticsensor Integrated piezoelectric compression sensor (PE), vonRoll hydro technology
Movementsensor Integrated digital acceleration sensor for operating control
Signal processing Frequency response 340 Hz to 3400 Hz
Certification CE / CB

LEAKPEN
Mobile, handy leak detector

All prices excl.
Delivery expected from end of June 2023, dates are subject to change.

CHF 499.00

Artikel 20160

Sustainability 🍃

At VONROLL HYDRO, respectful handling of resources has always been lived and legal regulations regarding the environment are complied with or even exceeded. With the further development of the environmental management system and the associated certification according to ISO 14001, the company underlines its environmental commitment. It is committed to providing the necessary means and structures to manufacture and distribute ecologically optimal products and equipment in the most environmentally friendly way possible. However, use and disposal should also have no negative impact on the environment.

We have reduced the use of natural resources and also reduced the amount of waste that cannot be put to good use. Reusable parts and materials are used for our products. These can be reprocessed, recycled, or reused in a completely different way.